Jasmine Fuga Pave Grout

Jasmine Fuga Pave Grout

Stock Item Available in 1–2 days

Options Available

Pointing Calculator
Fuga Pave Part C Jasmine Grout is suitable for joint widths as narrow as 2mm whilst also being equally suitable for joints of up to 20mm. This versatility means that Jasmine Fuga Pave Grout can be used for grouting internal tiles and external landscaping projects. The cement hybrid technology that makes this product unique means that its already the first choice for professional contractors who are looking for a durable, easy to use grouting solution.
Product TypePointing
PackagingMultilayer paper bag
Material TypeCementitious coloured powder
Country Of OriginUK
Application MethodTile Float
Application Surface Temperature5 - 30˚C
CoverageRefer to product calculator
Curing Time24 hours @ 20˚C
Storage & Shelf LifeStore in dry interior conditions away from direct sunlight between 5°C and 30°C. The product has a shelf life of 12 months from date of manufacture.
PPE RequirementsAvoid contact with eyes and skin. Wear latex gloves and protective clothing during application.
Recommended ForPorcelain, Sawn Limestone, Brazilian Slate, DesignClad
Working Time50 minutes @ 20˚C
Equipment RequiredBuckets, paddle mixer, water, tile float, sponges, trowel, pointing tool
Joint Width2-20mm
Pointing PreparationIt is recommended to wait at least 7-14 days before pointing. It can help to dampen natural paving before grouting to help reduce the risk of picture framing. Prior to grouting the open grout joints clean, dry and free of residues. Porous or textured tiles/slabs may require sealing before grouting with a suitable impregnating sealer. If in doubt trial an inconspicuous area to check for staining and correct colour before commencing.
MixingPrepare Fuga-Pave Flex CH in a clean container, first of all pouring in 3.37l of water (approximately 3⁄4 of the amount required). Gradually add Fuga-Pave Flex CH to the container, mixing the paste from the bottom upwards with a low-rev (≈ 400/min) helicoidal agitator. Add more of the remaining 1.13l of water until the desired consistency is obtained. The mixture must be of smooth consistency and without any lumps. For best results, and to mix larger quantities of the grout, a stirring device with vertical blades and slow rotation is recommended. Specific polymers with high-dispersion properties ensure that Fuga-Pave Flex CH is immediately ready for use. Mix a quantity to be used within 60 min. at +23 °C 50% R.H. The amount of water to be added, indicated on the packaging, is an approximate guide and will vary depending on the different colours. It is possible to obtain mixtures with consistency of variable thixotropy according to the application to be made. Adding extra water does not improve the workability and the cleanability of the grout and may cause shrinkage in the plastic phase of drying and result in less effective final performance. Prepare all mixtures required to complete the process using the same amount of water in order to avoid any variations in grout shade.
Application ProcessFuga-Pave must be applied evenly on the tile covering with a spreader or hard rubber float. Grout material has to be completely filled between entire joint areas, the application has to be done diagonally with respect to the joints.
Cleaning ToolsWash all tools frequently to avoid material bonding to them
Cleaning During ApplicationBegin cleaning the tiles when the grout is touch dry into the joint. On completion, clean up the surface using a thick, large-sized sponge damped in clean water to avoid removing grout from the joints. Make sure clean water is used at all times, using appropriate trays with grills and cleaning rollers for the sponge. Use circular movements to emulsify the film of hardened grout on the tiles. Finish cleaning up by dragging the sponge diagonally across the tiles while applying water evenly over the tiles in order to prevent any shade variations. Residual traces of grout can be removed from tools with water before the product has hardened.


Can withstand a light jet wash, be careful not to get too close which could damaged the joint

Please see our FAQs for more information.

Delivery Cost

£10 standard courier charge, up to 25kg

£20 standard courier charge, up to 50kg

£45 per micro pallet charge, up to 250kg per pallet

Standard pallet charges apply to orders over 250kg. Add your delivery postcode at checkout for pricing.

Delivery Times

Choose your delivery date when checking out. Timed slots are not available.

Free* next day delivery available to certain postcodes. (*T&C's apply)


Cancel up to 14 days from the date of delivery. Products to be returned in the same condition and packaging. No returns for bespoke or pre-sealed items.

You will be responsible for returning the material to London Stone. Collection can be made by us but this will incur a collection cost.

All prices shown are + VAT.

Installation tools

You may also like