Product Type | Adhesive |
---|---|
Product Detail | Norcros One Part Flexible Grey is a highly polymer fortified adhesive mortar for use on walls & floors in both internal and external locations. It requires only the addition of water as it is specially formulated with Rock-Tite™ polymeric binders to impart flexibility, water resistance and increased strength - usually only achieved by the addition of polymer admixtures. It is ideal for use in heavy duty areas such as swimming pools, commercial showers and locations where thermal variation may occur such as heated floors. |
Packaging | Multilayer paper bag |
Material Type | Cementitious coloured powder with polymers |
Country Of Origin | UK |
Application | Internal/External |
Application Method | Notched Trowel |
Weight | 20kg |
Coverage | Refer to product calculator |
Curing Time | 16 - 24 hours @ 20˚C |
Storage & Shelf Life | Store in dry internal conditions away from direct sunlight between 5°C to 25°C. The product has a 12 month shelf life from date of manufacture. |
PPE Requirements | Avoid contact with eyes and skin. Wear latex gloves and protective clothing during application. |
Recommended For | Grey for Porcelain & Stone, White for light coloured Natural Stone |
Working Time | > 4 hours @ 20˚C |
Bed Thickness | 2 - 6mm |
Equipment Required | Buckets, paddle mixer, water, sponges, notched trowel |
---|---|
Pointing Preparation | All surfaces should be dry, clean and strong enough to support the tiles to be fixed. Tiling substrates should be true and flat to permit fixing without visible lipping of tile edges. On floors, any gaps exceeding 3mm under a 2 metre straight edge should be corrected using a suitable Norcros Levelling Compound. This will be particularly appropriate where larger tiles or those with rectified edges are being installed. Porous or dusty surfaces must be sealed using Norcros Prime Bond diluted 1:4 with water. |
Mixing | Into a clean pail add 1 part of cold water and gradually introduce approximately 3.5 parts of adhesive powder stirring to blend the mixed mortar to a smooth lump free consistency. The properly mixed mortar will be thick enough to hold the adhesive ribs without slumping. The product has an ease of use pot life of up to 4 hours, however this will be extended in cold conditions and reduced in hot weather/warm temperatures. |
Application Process | Using a suitably notched trowel spread the adhesive onto the fixing surface to form parallel ribs into which the tiles should be applied with a firm twisting action. Spread only enough material that remains workable and as such fully wets out on the tile backing. Solid-bed void-free fixing will be necessary on floors and in wet areas. Tiles with deeply keyed back profiles may need to be back buttered. The adhesive is designed for thin bed fixing up to 6mm although in isolated areas it can be bedded out up to 12mm in thickness. Tiles may be grouted as soon as the adhesive bed is set. Do not use below 5°C. Refer to the product guide for further information. |
Cleaning Tools | Wash all tools frequently to avoid material bonding to them |
Cleaning During Application | Always keep a clean sponge and water available for wiping off any excess or spillages from paving |
£10 standard courier charge up to 25kg
£20 standard courier charge up to 50kg
£35 per micro pallet charge up to 250kg per pallet
£50 per pallet charge up to 1000kg per pallet
Choose your delivery date when checking out. Timed slots are not available.
Free* next day delivery available to certain postcodes. (*T&C's apply)
Cancel up to 14 days from the date of delivery. Products to be returned in the same condition and packaging. No returns for bespoke or pre-sealed items.
You will be responsible for returning the material to London Stone. Collection can be made by us but this will incur a collection cost.