Product Detail | Fuga Pave Primer is a cement-based primer which contains fibre reinforcement and specially designed polymer additives to promote bond strength and enable fixing of porcelain and other low absorption types of paving to both hardcore and solid bases. Simply mix the primer powder with water and apply to the back of the paving before fixing in a bed of Fuga Pave Mortar. It can be used in internal and external domestic and heavily trafficked installations. |
---|---|
Packaging | Multi-layer paper bag |
Suitable for | Porcelain & Natural Stone |
Material Type | Cementitious coloured powder with polymers |
Country Of Origin | UK |
Application | Internal/External |
Application Method | Brush |
Weight | 20 Kg |
Application Surface Temperature | 3 - 25˚C |
Coverage | 28m2 per bag |
Curing Time | 4 hours @ 20˚C |
Storage & Shelf Life | Store in dry internal conditions away from direct sunlight between 5 - 25˚C. The product has a 12 month shelf life from date of manufacture. |
PPE Requirements | Avoid contact with eyes and skin. Wear latex gloves and protective clothing during application. |
Working Time | 4-5 hours @ 20˚C |
Bed Thickness | 1 - 2mm |
Install Preparation | It is essential that the underside of the paving is clean and dry before the primer is applied. Thoroughly dry brush to remove all dust, dirt or any other material which may impair adhesion. Suitable for use in temperatures between 30˚C and 25˚C. |
---|---|
Equipment Required | Buckets, paddle mixer, water, sponges, hand brush. |
Mixing | Add approximately 6.2 litres of cold water to a suitable mixing bucket and gradually introduce the 20kg of powder (approximately 0.3 litres of water/ 1kg of powder used), stirring to blend the mixed primer to a smooth lump-free slurry. It is essential to only mix enough material that can be used within the pot life of the product. The primer has a pot life of around 60 minutes at 20oC, which will be extended in cold conditions and reduced in warm temperatures. |
Application Process | Using a suitable brush or roller, apply the mixed primer slurry over the whole of the underside of each slab at a thickness of 1mm-2mm immediately before laying onto the mortar bed. Please note that Fuga-Pave Primer is a cement-based product and therefore all tools should be washed with clean water immediately after use. Do not empty waste material into the drainage system. |
Cleaning Tools | Wash all tools frequently to avoid material bonding to them. |
Cleaning During Application | Always keep a clean sponge and water available for wiping off any excess or spillages from paving. |
£10 standard courier charge, up to 25kg
£20 standard courier charge, up to 50kg
£45 per micro pallet charge, up to 250kg per pallet
Standard pallet charges apply to orders over 250kg. Add your delivery postcode at checkout for pricing.
Choose your delivery date when checking out. Timed slots are not available.
Free* next day delivery available to certain postcodes. (*T&C's apply)
Cancel up to 14 days from the date of delivery. Products to be returned in the same condition and packaging. No returns for bespoke or pre-sealed items.
You will be responsible for returning the material to London Stone. Collection can be made by us but this will incur a collection cost.
All prices shown are + VAT.