Burnt Cedar Shadow Line

Burnt Cedar Shadow Line

FREE* Delivery. Available in 5–10 working days
Item not on display in our showrooms.

Options Available

Use our Burnt Cedar Millboard Cladding to clad the outside of your home or to create impressive features in the garden. The luxurious smooth dark tones will make a stunning addition to any property. Designed to have an authentic look that perfectly replicates smooth timber with a flat grained finish and hand painting for an even more realistic feel. Not only does Millboard cladding have a stunning appearance but it is also extremely hard-wearing and requires minimal maintenance. The boards do not twist or warp over time and angle in the finish of the boards prevent water from collecting and even aid in helping rainwater wash over the boards to help reduce the need for manual cleaning.
DimensionsSee Options Available table above
Installed Width181mm (19mm overlap)
ToleranceWidth: ± 3mm. Length: ± 5mm. Thickness: ± 2mm.
Product TypeCladding
PackagingPlastic Wrap
Suitable forWalls
Surface FinishMoulded from smooth timber
Material TypeWood free, blend of minerals and polymer resins and Lastane finish
Country Of OriginUK
ApplicationExternal
Weight6.3 Kg
Frost ResistantYes
Water Absorption0%
Guarantee15-year residential guarantee against structure and surface finish of the material following correct installation
Fire RetardantMillboard Cladding has no fire rating, the responsibility for the cladding’s suitability in the required location is to be determined by a certified building professional (building control officer, building insurance, fire officer, etc).
CuttingBench mounted drop saw fitted with a carbon tipped timber/multi purpose blade
Installation processFix battens to area to be clad. Support centres are minimum 400m for Shadow line (for increased load it should be 300mm). Always allow a vertical airflow/ventilation gap of at least 19mm so you get a continuous airflow behind cladding. Breathable membranes and waterproofing for walls may be required depending on the wall type being fixed too. Start with the correct starter trim at the bottom of the installation, "J" trim for where cladding is installed horizontally or "L" trim where installed vertically. Install trim at the bottom of the area to be clad along with the Perforated Closure to prevent insects or rodents from getting into cavity behind cladding. Fix these using the accessories fixing screws. Place first board on starter trim at the bottom and secure the tongue of the board into the battens using the cladding board fixing screws. If you cannot fix through the tongue then use DuraFix screws to fix through the face of the board. Fascias can be used for window/door reveals and soffits. For Shadow Line use the specific Internal and External corner profiles. See install guide for detail.

Aftercare

Millboard Cladding requires minimal aftercare. If boards become dirty during installation, cleaned as soon as possible using warm soapy water and a brush or pressure washer. Note - Pressure washers can be used on Millboard Cladding, with a PSI of no greater than 2000. A fan tip should be used with a 40 to 60 degree spread, keeping the head 250-300mm away from the surface. Always test in an inconspicuous area first - direct, prolonged contact might damage the surface of the boards. Stubborn marks can be removed with a range of different cleaners depending on the mark. Please contact us for more information.

Please see our FAQs for more information.

Delivery Cost

Free of charge on all full packs and any orders over £1,000 + VAT.

Charges apply to split pack and/or any order under £1,000 + VAT.

Delivery Times

Choose your delivery date when checking out. Timed slots are not available.

Free* next day delivery available to certain postcodes. (*T&C's apply)

Returns

Cancel up to 14 days from the date of delivery. Products to be returned in the same condition and packaging. No returns for bespoke or pre-sealed items.

You will be responsible for returning the material to London Stone. Collection can be made by us but this will incur a collection cost.

Also available in

Installation materials

You may also like