Golden Oak Board & Batten

Golden Oak Board & Batten

FREE* Delivery. Available in 5–10 working days
Item not on display in our showrooms.

Options Available

Use our Golden Oak Millboard Cladding to clad the outside of the home, garages or elsewhere around the home and garden. Moulded from four individual pieces of timber with different widths and grain patterns to produce the warm texture of real oak boards. Gentle graining and wheat-gold tones combined with differing angles in the board that create shadow definition gives the Millboard cladding its realistic feel. Installing the boards is quick and easy, the boards simply require fixings through the tongue of the board. Once installed the fixings are not visible and the boards benefit from the technological advantages of Millboard, such as low-maintenance, rot-proof and easy drainage.
DimensionsSee Options Available table above
Installed Width181mm (19mm overlap)
ToleranceWidth: ± 3mm. Length: ± 5mm. Thickness: ± 2mm.
Product TypeCladding
PackagingPlastic Wrap
Suitable forWalls
Surface FinishMoulded from smooth timber
Material TypeWood free, blend of minerals and polymer resins and Lastane finish
Country Of OriginUK
ApplicationExternal
Weight7.1 Kg
Frost ResistantYes
Water Absorption0%
Fire RetardantMillboard Cladding has no fire rating, the responsibility for the cladding’s suitability in the required location is to be determined by a certified building professional (building control officer, building insurance, fire officer, etc).
CuttingBench mounted drop saw fitted with a carbon tipped timber/multi purpose blade
Installation processFix battens to area to be clad. Support centres are minimum 600mm for Board and Batten (for increased load it should be 400mm). Always allow a vertical airflow/ventilation gap of at least 19mm so you get a continuous airflow behind cladding. Breathable membranes and waterproofing for walls may be required depending on the wall type being fixed too. Start with the correct starter trim at the bottom of the installation, "J" trim for where cladding is installed horizontally or "L" trim where installed vertically. Install trim at the bottom of the area to be clad along with the Perforated Closure to prevent insects or rodents from getting into cavity behind cladding. Fix these using the accessories fixing screws. Place first board on starter trim at the bottom and secure the tongue of the board into the battens using the cladding board fixing screws. If you cannot fix through the tongue then use DuraFix screws to fix through the face of the board. Fascias can be used for window/door reveals and soffits. For Board and Batten use standard square edging for corners. See install guide for detail.

Aftercare

Millboard Cladding requires minimal aftercare. If boards become dirty during installation, cleaned as soon as possible using warm soapy water and a brush or pressure washer. Note - Pressure washers can be used on Millboard Cladding, with a PSI of no greater than 2000. A fan tip should be used with a 40 to 60 degree spread, keeping the head 250-300mm away from the surface. Always test in an inconspicuous area first - direct, prolonged contact might damage the surface of the boards. Stubborn marks can be removed with a range of different cleaners depending on the mark. Please contact us for more information.

Please see our FAQs for more information.

Delivery Cost

Free of charge on all full packs and any orders over £1,000 + VAT.

Charges apply to split pack and/or any order under £1,000 + VAT.

Delivery Times

Choose your delivery date when checking out. Timed slots are not available.

Free* next day delivery available to certain postcodes. (*T&C's apply)

Returns

Cancel up to 14 days from the date of delivery. Products to be returned in the same condition and packaging. No returns for bespoke or pre-sealed items.

You will be responsible for returning the material to London Stone. Collection can be made by us but this will incur a collection cost.

Also available in

Installation materials

You may also like