GftK vdw 850 Natural
GftK vdw 850 Natural
How much do I need to order?
Enter the area to be pointed, paving size and average joint dimensions to calculate the amount of product required.
This calculator provides accurate figures based on the dimensions provided. On-site variables can lead to more/less material being required. London Stone recommend that extra materials are allowed for. Additional materials can be returned to us without incurring a re-stocking fee.
|Plastic outer tub with hardener in separate plastic bottle
|2 part - Sand grains coated in resin with separate hardener
|Country Of Origin
|Application Surface Temperature
|5 - 25˚C
|Refer to product calculator
|24 hours @ 20˚C
|Storage & Shelf Life
|1 year in original, unopened, sealed and undamaged packaging, kept dry and frost-free. Do not store over 20 °C.
|Avoid contact with eyes and skin. Wear latex gloves and protective clothing during application.
|Riven Natural Stone, Natural Stone Setts
|20 Minutes @ 20˚C
|Buckets, paddle mixer, water, rubber squeegee, coconut broom, trowel, pointing tool, adjustable hose attachment
|Prior to grouting the installation should be dry and the open grout joints clean, dry and free of residues. Porous or textured tiles/slabs may require sealing before grouting with a suitable impregnating sealer. If in doubt trial an inconspicuous area to check for staining and correct colour before commencing. Wet the Paving. Absolutely soak the area to be jointed with water using a hose. The paving must be saturated before starting and remain soaked throughout the application process - in fact, the wetter the better. Do not shortcut this process, particularly if working with absorbent or sensitive materials such as Sawn Sandstone, Granite and many Limestone types. Particularly sensitive stone will need sealing, preferably before laying.
|Mixing the joint mortar: Pre-mix the aggregate, then add the binder and mix with the drill and spherical paddle mixers for approx. 3 minutes until smooth and homogeneous. Do not mixpartial quantities of the product. No water should be added to the mix.
|Filling the joints: Apply immediately after mixing by pouring directly onto the pre-wetted surface. Work the mortarthoroughly into the joints using a hard rubber squeegee, whilst spraying lightly with water from a hose. The surface should be kept constantly wet during application. We recommend working from the highest to the lowest points. Brushing off and cleaning: Remove any excess mortar residue immediately from the area by spraying lightly with water from a hose. Be careful to clean the paved surface towards areas not yet jointed. Remove any final residual mortar with a damp coconut fibre brush. Do not brush this residual mortar into any unfilled joints. It is importantto make sure that no water or residual mortar remains on the surface. Refer to the product guide for further information.
|Wash all tools frequently to avoid material bonding to them
|Cleaning During Application
|Always fully wash off the oil residue until you can no longer see a film on the water, ensure any material is swept of and no left to set on the paving.
AftercareCan withstand a jet wash, be careful not to get too close which could damaged the joint
£45 per micro pallet charge, up to 250kg per pallet (to avoid breakages)
Standard pallet charges apply to orders over 250kg. Add your delivery postcode at checkout for pricing.
Choose your delivery date when checking out. Timed slots are not available.
Free* next day delivery available to certain postcodes. (*T&C's apply)
Cancel up to 14 days from the date of delivery. Products to be returned in the same condition and packaging. No returns for bespoke or pre-sealed items.
All prices shown are + VAT.
You will be responsible for returning the material to London Stone. Collection can be made by us but this will incur a collection cost.