Schellevis Concrete Steps

Schellevis Concrete Steps

Options Available

This product or service is not currently available to purchase online. Please contact us on 01753 212 950 for more information, or to place an order with one of our experienced Sales Advisors.

Please note, this product or service is not eligible for our online-only discount.

To create a smooth transition between levels, Schellevis Step units allow for both style and substance. Available in an eye-catching thickness of either 150 or 200mm, the step units also carry a generous tread-depth or between 370 and 400mm. Before buying, we recommend that all customers read our Product Guide.
DimensionsSee Options Available table above
Tolerance+/- 2mm
Product TypePaving
PackagingWooden Crates, internal foam protection, plastic wrap
Suitable forPatios, Paths, Steps, Driveways
Surface FinishOpen texture
EdgesTapered towards top
Edge ProfileSquare
Material TypeConcrete
Country Of OriginNetherlands
SealingOptional - Improves maintenance
ApplicationExternal
Weight2230 kg/m³
Slip Resistance67 Wet
Frost ResistantYes
Flexural Strength5.0 Mpa
Water Absorption4.00%
Sub BaseGeo Textile first followed by Compacted DPt (MOT) Type 1 Minimum 100mm for patios Minimum 200mm for driveways
Installation Method30mm sharp sand screed and jointed with Kiln Dried sand
CuttingDiamond blade for natural stone on a grinder, petrol cutter or table saw
Joint WidthMinimum 4-5mm at base of joint

Aftercare

All stains that occur naturally, should fade overtime with rainfall and sunlight. This rule should also apply to organic stains, such as stains caused by leaves. Regular maintenance and rainfall should make these stains fade. It is recommended you keep your pavement clean by regularly sweeping the surface, or using a leaf blower. When necessary you can clean the pavement with water and a soft brush. The use of chemical detergents like bleach is strongly advised against. If necessary one can use a soft organic soap. We advise against using pressure washers to clean the slabs, because they can damage the surface of the slabs. Which can then make the paving more vulnerable to staining in the future. Never leave any soil, peat, dirty sand or cement on the slabs. Remove directly and wash with clean water and a soft brush. The algae and moss growth is a natural process and is caused by a combination of little sunlight, high humidity and low temperatures. This is true for all paving materials, both concrete and natural stone. This can be easily removed, without scrubbing, by using a biological anti-moss or anti-algae agent such as Lithofin Algex. Efflorescence is a natural process, and is nothing to be concerned about, that occasionally occurs and is caused by a chemical reaction from cement (inside the concrete) with water and results in a so-called lime scale formation (efflorescence) on the surface of the product. This will normally soon disappear again and is therefore temporary

Please see our FAQs for more information.

Delivery Cost

£50 pound per pallet up to 1000kg

£50 pound flat rate for London and Surrounding areas

Delivery Times

Choose your delivery date when checking out. Timed slots are not available.

Free* next day delivery available to certain postcodes. (*T&C's apply)

Returns

Cancel up to 14 days from the date of delivery. Products to be returned in the same condition and packaging. No returns for bespoke or pre-sealed items.

You will be responsible for returning the material to London Stone. Collection can be made by us but this will incur a collection cost.