Norcros Rapid Setting Adhesive

Norcros Rapid Setting Adhesive

Stock Item Available in 1–2 days

Options Available

Adhesive Calculator
Used for fixing Porcelain or Natural Stone, internally or externally, the high polymer level of these adhesives mean that they only need mixing with water to achieve the flexibility, water resistance, and increased strength usually only obtained by the addition of separate polymer admixtures. For fixing light coloured natural stone use the white colour. Before buying, we recommend that all customers read our Product Guide.
Product TypeAdhesive
Product DetailNorcros Rapid Porcelain Flexible Tile Adhesive is a grey or white cement-based thin bed adhesive designed for fixing fully vitrified porcelain, ceramic and stone tiles to a variety of building surfaces. It is water and weather resistant and is suitable for both internal and external locations. Containing unique Rock-TiteTM polymeric binders the enhanced flexibility of the adhesive allows a greater range of fixing possibilities normally only achieved by the addition of separate admixtures. The adhesive has excellent thermal ageing properties and is particularly suitable for heated floors and prepared plywood sheets.
PackagingMultilayer paper bag
Material TypeCementitious coloured powder with polymers
Country Of OriginUK
ApplicationInternal/External
Application MethodNotched Trowel
Weight20kg
Application Surface Temperature5 - 30˚C
CoverageRefer to product calculator
Curing Time3 hours @ 20˚C
Storage & Shelf LifeStore in dry internal conditions away from direct sunlight between 5°C to 25°C. The product has a 12 month shelf life from date of manufacture.
PPE RequirementsAvoid contact with eyes and skin. Wear latex gloves and protective clothing during application.
Recommended ForGrey for Porcelain & Stone, White for light coloured Natural Stone
Working Time30 Minutes @ 20˚C
Bed Thickness2 - 6mm
Equipment RequiredBuckets, paddle mixer, water, sponges, notched trowel
Pointing PreparationAll surfaces should be dry, clean and strong enough to support the tiles to be fixed. Tiling substrates should be true and flat to permit fixing without visible lipping of tile edges. On floors, any gaps exceeding 3mm under a 2 metre straight edge should be corrected using a suitable Norcros Levelling Compound. This will be particularly appropriate where larger tiles or those with rectified edges are being installed. Porous or dusty surfaces must be sealed using Norcros Prime Bond diluted 1:4 with water.
MixingInto a clean pail add 1 part of cold water and gradually introduce approximately 3.5 parts of adhesive powder stirring to blend the mixed mortar to a smooth lump free consistency. The properly mixed mortar will be thick enough to hold the adhesive ribs without slumping. Mix only enough material that can be used within the pot life of the product which will be around 30 minutes - this will be extended in cold conditions and reduced in hot weather/ warm temperatures.
Application ProcessUsing a suitably notched trowel spread the adhesive onto the fixing surface to form parallel ribs into which the tiles should be applied with a firm twisting action. Spread only enough material that remains workable and as such fully wets out on the tile backing. Solid-bed void-free fixing will be necessary on floors and in wet areas. Tiles with deeply keyed back profiles may need to be back buttered. The adhesive is designed for thin bed fixing up to 6mm although in isolated areas it can be bedded out up to 12mm in thickness. Tiles may be grouted as soon as the adhesive bed is set. Under normal conditions this will be around 3 hours after fixing although this will be extended in cold conditions. Do not use below 5°C. Refer to the product guide for further information.
Cleaning ToolsWash all tools frequently to avoid material bonding to them
Cleaning During ApplicationAlways keep a clean sponge and water available for wiping off any excess or spillages from paving
Please see our FAQs for more information.

Delivery Cost

£10 standard courier charge up to 25kg

£20 standard courier charge up to 50kg

£35 per micro pallet charge up to 250kg per pallet

£50 per pallet charge up to 1000kg per pallet

Delivery Times

Choose your delivery date when checking out. Timed slots are not available.

Free* next day delivery available to certain postcodes. (*T&C's apply)

Returns

Cancel up to 14 days from the date of delivery. Products to be returned in the same condition and packaging. No returns for bespoke or pre-sealed items.

You will be responsible for returning the material to London Stone. Collection can be made by us but this will incur a collection cost.

You may also like