Fuga Pave Permeable Bedding Primer

Fuga Pave Permeable Bedding Primer

Stock Item Available in 1–2 days

Options Available

Our Fuga Pave Primer is ideal for laying a residential driveway or patio when using in conjunction with Fuga Pave bedding mortar. Bedding primer is applied to the underside of paving units to improve adhesion to the bedding mortar. The primer must be applied moments before the paving slab is installed onto the prepared bed. The primer can also be used for ensuring that exposed features such as wall copings, pier caps, or step treads are securely fixed and do not become loose.
Product DetailFuga Pave Primer is a cement-based primer which contains fibre reinforcement and specially designed polymer additives to promote bond strength and enable fixing of porcelain and other low absorption types of paving to both hardcore and solid bases. Simply mix the primer powder with water and apply to the back of the paving before fixing in a bed of Fuga Pave Mortar. It can be used in internal and external domestic and heavily trafficked installations.
PackagingMulti-layer paper bag
Suitable forPorcelain & Natural Stone
Material TypeCementitious coloured powder with polymers
Country Of OriginUK
ApplicationInternal/External
Application MethodBrush
Weight20 Kg
Application Surface Temperature3 - 25˚C
Coverage28m2 per bag
Curing Time4 hours @ 20˚C
Storage & Shelf LifeStore in dry internal conditions away from direct sunlight between 5 - 25˚C. The product has a 12 month shelf life from date of manufacture.
PPE RequirementsAvoid contact with eyes and skin. Wear latex gloves and protective clothing during application.
Working Time4-5 hours @ 20˚C
Bed Thickness1 - 2mm
Install PreparationIt is essential that the underside of the paving is clean and dry before the primer is applied. Thoroughly dry brush to remove all dust, dirt or any other material which may impair adhesion. Suitable for use in temperatures between 30˚C and 25˚C.
Equipment RequiredBuckets, paddle mixer, water, sponges, hand brush.
MixingAdd approximately 6.2 litres of cold water to a suitable mixing bucket and gradually introduce the 20kg of powder (approximately 0.3 litres of water/ 1kg of powder used), stirring to blend the mixed primer to a smooth lump-free slurry. It is essential to only mix enough material that can be used within the pot life of the product. The primer has a pot life of around 60 minutes at 20oC, which will be extended in cold conditions and reduced in warm temperatures.
Application ProcessUsing a suitable brush or roller, apply the mixed primer slurry over the whole of the underside of each slab at a thickness of 1mm-2mm immediately before laying onto the mortar bed. Please note that Fuga-Pave Primer is a cement-based product and therefore all tools should be washed with clean water immediately after use. Do not empty waste material into the drainage system.
Cleaning ToolsWash all tools frequently to avoid material bonding to them.
Cleaning During ApplicationAlways keep a clean sponge and water available for wiping off any excess or spillages from paving.
Please see our FAQs for more information.

Delivery Cost

£10 standard courier charge up to 25kg

£20 standard courier charge up to 50kg

£35 per micro pallet charge up to 250kg per pallet

£50 per pallet charge up to 1000kg per pallet

Delivery Times

Choose your delivery date when checking out. Timed slots are not available.

Free* next day delivery available to certain postcodes. (*T&C's apply)

Returns

Cancel up to 14 days from the date of delivery. Products to be returned in the same condition and packaging. No returns for bespoke or pre-sealed items.

You will be responsible for returning the material to London Stone. Collection can be made by us but this will incur a collection cost.